A few Bellota pots
+19
DWThomas
jersanct
Storm
Gwyther
prestontolbert
Robert Wallace
a.muenz
chatsworth45
martin kolacia
Tom Benda
Stone Monkey
Dan Barton
kitoi
Rob Addonizio
Billy M. Rhodes
yamadorian
peter krebs
Russell Coker
pjkatich
23 posters
Page 3 of 6
Page 3 of 6 • 1, 2, 3, 4, 5, 6
Re: A few Bellota pots
That is a pretty sweet glaze. It looks like Bailey's red in oxidation. It looks really great on porcelain.
PS Rob- My wife Sara and I are coming down to NCECA this year. If you don't do the convention there are tons of shows in conjunction with the conference that are worth seeing.
PS Rob- My wife Sara and I are coming down to NCECA this year. If you don't do the convention there are tons of shows in conjunction with the conference that are worth seeing.
prestontolbert- Member
Re: A few Bellota pots
Paul, I love the iron glaze in the previous pot. No doubt it would look quite different on another body. Clay bodies do a lot to influence a glaze, as potters well know....
As to the pot that preceded it, the blue with crusty glaze, I think you could definitely use it as a source of exploration. The blue works interestingly off the iron from the underlying glaze; visually they are close to opposite on the color wheel and this could be something to develop further. Perhaps try the same combo on a different form, different underlying textures, etc. I could definitely see a series of this type if it were further developed. One thing is for sure, you should be commended on your freshness and willingness to experiment...
Preston,
Thanks for the tip about the convention. I will definitely look into it. Btw, it would be great to meet and talk to you in person, especially in an environment as NCECA can bring!
What about you Robert, are you game?
As to the pot that preceded it, the blue with crusty glaze, I think you could definitely use it as a source of exploration. The blue works interestingly off the iron from the underlying glaze; visually they are close to opposite on the color wheel and this could be something to develop further. Perhaps try the same combo on a different form, different underlying textures, etc. I could definitely see a series of this type if it were further developed. One thing is for sure, you should be commended on your freshness and willingness to experiment...
Preston,
Thanks for the tip about the convention. I will definitely look into it. Btw, it would be great to meet and talk to you in person, especially in an environment as NCECA can bring!
What about you Robert, are you game?
Rob Addonizio- Member
Re: A few Bellota pots
Paul,
Nie pot! I think Preston may have nailed the glaze, but great application. If I may take a stab at the blue crusty one... Possibly a barium or strontium blue over bone ash???? This could be a game show
I need to post a few for this game...
Robert
Rob, as for NCECA... I would love to go however I do not want to be sleeping in the kiln shed and my wife is not so fond of the Idea of me leaving her at home with the boys for the Floridia get a way... If any of you make it up in the fall for the Carolina Bonsai Expo maybe we could catch up then.
Cheers!
Robert
Nie pot! I think Preston may have nailed the glaze, but great application. If I may take a stab at the blue crusty one... Possibly a barium or strontium blue over bone ash???? This could be a game show
I need to post a few for this game...
Robert
Rob, as for NCECA... I would love to go however I do not want to be sleeping in the kiln shed and my wife is not so fond of the Idea of me leaving her at home with the boys for the Floridia get a way... If any of you make it up in the fall for the Carolina Bonsai Expo maybe we could catch up then.
Cheers!
Robert
Robert Wallace- Member
Re: A few Bellota pots
prestontolbert wrote:That is a pretty sweet glaze. It looks like Bailey's red in oxidation. It looks really great on porcelain.
Hey Preston,
I'm not familiar with Bailey's red. Is it an iron red glaze?
The one shown is a Tomato red glaze fired in reduction to cone 10.
Paul
pjkatich- Member
Re: A few Bellota pots
Rob Addonizio wrote:Paul, I love the iron glaze in the previous pot. No doubt it would look quite different on another body. Clay bodies do a lot to influence a glaze, as potters well know....
Yes indeed Rob, the clay body does influence the look of the glaze very much.
This is the Tomato red glaze you have commented on before. It looks very different on porcelain doesn't it?
Here are a few more pots made from darker clay bodies and finished in the same glaze.
Rob Addonizio wrote:As to the pot that preceded it, the blue with crusty glaze, I think you could definitely use it as a source of exploration. The blue works interestingly off the iron from the underlying glaze; visually they are close to opposite on the color wheel and this could be something to develop further. Perhaps try the same combo on a different form, different underlying textures, etc. I could definitely see a series of this type if it were further developed. One thing is for sure, you should be commended on your freshness and willingness to experiment...
Thanks for sharing your thoughts on this glaze. Your feedback is always welcome.
Regards.
Paul
Last edited by pjkatich on Sun Mar 06, 2011 11:52 am; edited 1 time in total
pjkatich- Member
Re: A few Bellota pots
Robert Wallace wrote:Paul,
If I may take a stab at the blue crusty one... Possibly a barium or strontium blue over bone ash???? This could be a game show
I need to post a few for this game...
Robert
Good guess Robert, I'll award you 5 points on this one.
That blue crusty one is a barium based glaze. However, it's not applied over anything but the clay body which is a gray stoneware.
Thanks for you participation.
Cheers,
Paul
pjkatich- Member
Re: A few Bellota pots
Paul,
Nice pots as usual. I too am interested in the blue and white pot. I think the color combo is very nice.
Looking forward to seeing you in Orlando next month!
Rob
Nice pots as usual. I too am interested in the blue and white pot. I think the color combo is very nice.
Looking forward to seeing you in Orlando next month!
Rob
Rob Addonizio- Member
Re: A few Bellota pots
Russell Coker wrote:Paul, I'm not much of a fan of these stretch pots, too much texture for me.
BUT, I do LOVE this...Can't take my eyes off it!
R
Ah! Another convert.
Thanks Russell, I appreciate the feedback.
Regards,
Paul
pjkatich- Member
Re: A few Bellota pots
Rob Addonizio wrote:Paul,
Nice pots as usual. I too am interested in the blue and white pot. I think the color combo is very nice.
Thanks for the compliment Rob.
In regards to your interest in the blue and white pot, hold that thought. We can discuss it face to face in Orlando.
Cheers.
Paul
pjkatich- Member
Re: A few Bellota pots
Hi Paul
Great pots, all very beautiful, i particularly like the turquoise one that you say is a bit different, the texture makes it very tactile.
Cheers
Vic
Great pots, all very beautiful, i particularly like the turquoise one that you say is a bit different, the texture makes it very tactile.
Cheers
Vic
Gwyther- Member
Re: A few Bellota pots
Rob Addonizio wrote:Paul,
Nice pots as usual. I too am interested in the blue and white pot. I think the color combo is very nice.
Looking forward to seeing you in Orlando next month!
Rob
Sorry Rob. You'll have to settle for a knock-off!
Convert? I don't know about that, although I do like the green glazed one...
R
Russell Coker- Member
Re: A few Bellota pots
Russell Coker wrote:Convert? I don't know about that, although I do like the green glazed one...
Only time will tell Russell.
I appreciate your support.
Regards,
Paul
pjkatich- Member
Re: A few Bellota pots
Stone Monkey wrote:Paul
I like your barium blue glaze also. In a gas kiln they can be quite touchy but lovely all the same
Regards
Andy
Thanks Andy, I appreciate you sharing the photo of your pot with the barium blue glaze.
The finish on your pot looks very much like the one I am using. This is a new glaze for me and from my limited experience, I would agree with your that it is quite variable when fired in a gas reduction atmosphere.
Have you found a new kiln yet?
Cheers,
Paul
pjkatich- Member
Re: A few Bellota pots
Paul, am I seeing this correctly as a deep, red wine color? If so, it's not something you see often, and I really like it. Something blooming with white or yellow flowers would be wonderful, yellow fall color too. What does this glaze look like on a white-bodied porcelain pot?
R
Russell Coker- Member
Re: A few Bellota pots
Russell Coker wrote:Paul, am I seeing this correctly as a deep, red wine color? If so, it's not something you see often, and I really like it. Something blooming with white or yellow flowers would be wonderful, yellow fall color too. What does this glaze look like on a white-bodied porcelain pot? R
Yes Russell, you are seeing this correctly.
The glaze is called Plum Chun and it is a very dark, varigated plum/wine color.
This particular glaze is a variant of the traditional Chinese Blue Chun.
The two pots shown were made with a white stoneware clay body.
I have not yet tried this glaze on porcelain. That would be the next step in the testing process. I have a group of porcelain pots in the bisque kiln as we speak. My plan is to finish a few of them with Plum Chun and run them through the next glaze firing to see what happens. I'll be happy to post the results when they are ready.
Thanks for your feedback.
Cheers,
Paul
pjkatich- Member
Re: A few Bellota pots
Hello Paul - thank you for visiting us in St. Louis over the weekend, and best of luck at BSF. You produce stunning work, and I look forward to doing much more business with you in the future!
Chris
Chris
jersanct- Member
Page 3 of 6 • 1, 2, 3, 4, 5, 6
Similar topics
» A few pots
» Here's a few pots...
» Some of my new pots .
» Swindon Winter Image show 2016 help to collect commissioned pots
» Some of my pots......
» Here's a few pots...
» Some of my new pots .
» Swindon Winter Image show 2016 help to collect commissioned pots
» Some of my pots......
Page 3 of 6
Permissions in this forum:
You cannot reply to topics in this forum