Help me to choose a KILN!
3 posters
Page 1 of 1
Help me to choose a KILN!
Hello, everybody!!!
I make quite a while pots of cement mixture, but decided to try to get into it more serious and change over to clay. Please could you recommend me a muffle kiln? I would like to buy a size bigger, but in my apartment the mainlines voltage is 220 and there is only one phase. I would like the kiln with service temperature 1300° and found some variants. Please, could you advise me what variant is the best?
Nabertherm N 60 E –
-width: 360 мм;
- depth: 400 мм;-
-height: 440 мм;
1300°C double-sided heating
KITTEC Classic Line CL 43
- width - 350 мм.
- depth - 400 мм.
- height - 340 мм.
- 1320 °C three-sided heating the third from above
Rohde KE 55 L -
-width: 410 мм,
-depth: 380 мм;
-height: 340 мм;
1280 °C three-sided heating the third from bellow
May be you could recommend me more variants?
I make quite a while pots of cement mixture, but decided to try to get into it more serious and change over to clay. Please could you recommend me a muffle kiln? I would like to buy a size bigger, but in my apartment the mainlines voltage is 220 and there is only one phase. I would like the kiln with service temperature 1300° and found some variants. Please, could you advise me what variant is the best?
Nabertherm N 60 E –
-width: 360 мм;
- depth: 400 мм;-
-height: 440 мм;
1300°C double-sided heating
KITTEC Classic Line CL 43
- width - 350 мм.
- depth - 400 мм.
- height - 340 мм.
- 1320 °C three-sided heating the third from above
Rohde KE 55 L -
-width: 410 мм,
-depth: 380 мм;
-height: 340 мм;
1280 °C three-sided heating the third from bellow
May be you could recommend me more variants?
Igor Savin- Member
Re: Help me to choose a KILN!
Are you set on a front loader? Usually top loading kilns are less expensive. From your list I only have experience with nabertherm. They are TOP NOTCH kilns.
prestontolbert- Member
Re: Help me to choose a KILN!
prestontolbert wrote:Are you set on a front loader? Usually top loading kilns are less expensive. From your list I only have experience with nabertherm. They are TOP NOTCH kilns.
Kilns with a front loader have too small size and their shape are not square. Is it enough working temperature(Rohde KE 55 L) - 1280° for heating glaze.
Igor Savin- Member
Re: Help me to choose a KILN!
KITTEC are bloody brilliant but then so are ROHDE. Both German made and very good
Regards
Andy
Regards
Andy
Stone Monkey- Member
Re: Help me to choose a KILN!
Stone Monkey wrote:KITTEC are bloody brilliant but then so are ROHDE. Both German made and very good
Regards
Andy
Thank you! I think that i buy Nabertherm N 60 E because it has the biggest size.
Igor Savin- Member
The search continues
I can not choose.
Nabertherm N 60 E – 1300° ,
360*400*440
Double-sided heating
OR
Rohde KE 55 L -
-width: 410 мм,
-depth: 380 мм;
-height: 340 мм;
1280 °C three-sided heating the third from bellow
Your opinion about Varnia kilns?
Thank you!
Nabertherm N 60 E – 1300° ,
360*400*440
Double-sided heating
OR
Rohde KE 55 L -
-width: 410 мм,
-depth: 380 мм;
-height: 340 мм;
1280 °C three-sided heating the third from bellow
Your opinion about Varnia kilns?
Thank you!
Igor Savin- Member
Similar topics
» SUTEKI Accent Pots
» Pot or kiln ID
» From the SANSAI kiln
» 2 New from my kiln
» Straight from the kiln
» Pot or kiln ID
» From the SANSAI kiln
» 2 New from my kiln
» Straight from the kiln
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|