Changing some carving
+9
eaton2008
jadester1234
Stone Monkey
anttal63
bigsteve
fiona
dorothy7774
Kev Bailey
JimLewis
13 posters
Page 1 of 3
Page 1 of 3 • 1, 2, 3
Changing some carving
A friend of mine, owns this tree but wasnt sure about the carving. I did'nt like the way the deadwood poked out to the right and the straight section of live wood underneath the right side. It also looked as if a Makita had been run up the middle, rather than natural rot. He gave me the go ahead to refine it for him. Did this work this morning. First couple of pics are how it was.
Guest- Guest
Re: Changing some carving
Looks like another Podocarpus -- but maybe some kind of yew?
Nicely done on the carving. It had more deadwood than I care for at the beginning, but you work with what you're given. Its a very nice tree.
Nicely done on the carving. It had more deadwood than I care for at the beginning, but you work with what you're given. Its a very nice tree.
JimLewis- Member
Re: Changing some carving
I guess this is Taxus baccata. Your work has improved it dramatically Will.
Kev Bailey- Admin
Re: Changing some carving
So much better Will. Well done. Any chance of a pic taken from a bit back so we can see the whole tree - to get a before and after comparison with your first pic.
Size of the tree?
Size of the tree?
fiona- Member
Re: Changing some carving
Well Done will
the difference is the tree is starting to look more natural rather than gouged
the good thing with these Yews are they do forgive heavy handedness.
the difference is the tree is starting to look more natural rather than gouged
the good thing with these Yews are they do forgive heavy handedness.
bigsteve- Member
Re: Changing some carving
Sorry. It is Taxus Bacatta. I've just spent an hour, removing the wire and thinning it out. Some wire had bitten in! I'm going to restyle it tomorrow, if i'm allowed!
Guest- Guest
Re: Changing some carving
get stuck in Will ha ha i am sure he will appreciate it..........will baddeley wrote:Sorry. It is Taxus Bacatta. I've just spent an hour, removing the wire and thinning it out. Some wire had bitten in! I'm going to restyle it tomorrow, if i'm allowed!
bigsteve- Member
Re: Changing some carving
Will
Wish I had brought the tree to you when it was mine and before I passed it onto Graham. I have some early pictures of this tree when I first obtained it way back in 2005. It was a tree I purchased in 2005 and sort of left to one side and worked on other trees whilst this one sat neglected. However I did take it to Burrs 3 or may be 4 years ago to work on
Your work is really good. If the owner of the tree wants pictures from 2005 till I parted company with the tree drop me an email and I will send them on
All the best and thanks for showing
Andy
Wish I had brought the tree to you when it was mine and before I passed it onto Graham. I have some early pictures of this tree when I first obtained it way back in 2005. It was a tree I purchased in 2005 and sort of left to one side and worked on other trees whilst this one sat neglected. However I did take it to Burrs 3 or may be 4 years ago to work on
Your work is really good. If the owner of the tree wants pictures from 2005 till I parted company with the tree drop me an email and I will send them on
All the best and thanks for showing
Andy
Stone Monkey- Member
Re: Changing some carving
For some reason the host an image box is'nt working. Completely blank!
Andy, I like the way trees pass from person to person, each seeing something different.Im sure the present owner would love your history of the Yew. Have wired the tree tonight, and photographed it but I can't upload it.
Andy, I like the way trees pass from person to person, each seeing something different.Im sure the present owner would love your history of the Yew. Have wired the tree tonight, and photographed it but I can't upload it.
Guest- Guest
Re: Changing some carving
Hi Will. It does that from time to time and on more occasions than not, it has been a problem with servimg rather than on here. Try again later and if it stll is causing problems, give Kev a shout in a PM.will baddeley wrote:For some reason the host an image box is'nt working. Completely blank! Have wired the tree tonight, and photographed it but I can't upload it.
btw now that I see it against Andy, I can get a much more accurate gauge of the size of the tree, so no need to reply to my previous request.
Last edited by fiona on Sat Nov 21, 2009 10:05 am; edited 1 time in total
fiona- Member
Re: Changing some carving
great work will!! your friend is very lucky!! is there anyway i can get you to work on some of my trees??do you do workshops??
jadester1234- Member
Re: Changing some carving
FANTASTIC CARVING WILL! many thanks it looks far better than when i left it with you. cant wait to see the pictures when you can upload them.
eaton2008- Member
Re: Changing some carving
Still cant upload. I see others are posting pics?Ive sent Kev a pm but hes not online. When i click host an image the box opens but there's nothing in it. can someone have a go so I'll know whether its the server or my problem. Thanks
Guest- Guest
Re: Changing some carving
did you use a similar technique on your big yew and elm??it must have taken ages with the scalpul as yew wood can be very hard!!did you do any carving at the bottom of the tree on the right??
eaton2008- Member
Re: Changing some carving
I had this happen to me once before and i logged out and in again and it righted it self. Maybe you have tried this already if not its worth a try.
Smithy- Member
Re: Changing some carving
heres something bigger if you fancy its about 7 - 8 inches across!?
eaton2008- Member
Re: Changing some carving
Eaton, ive sent you an email with the pic, can you post it please.
Guest- Guest
Page 1 of 3 • 1, 2, 3
Similar topics
» Brt. , changing ta bark...
» Grafting- changing clothes
» MY CHINESE ELM UPDATE
» the changing face of an acer
» Changing the colour of unglazed pots
» Grafting- changing clothes
» MY CHINESE ELM UPDATE
» the changing face of an acer
» Changing the colour of unglazed pots
Page 1 of 3
Permissions in this forum:
You cannot reply to topics in this forum